STERITOOL INC

Stainless Steel 3/32" x 7/64" Double L Hex Key

Stainless Steel 3/32" T Hex Key 7.75" OAL

Stainless Steel 7mm Single Open End Wrench

Stainless Steel 'L' 1/4" Parallel Screwdriver Key

Stainless Steel 10mm x 12mm x 9/16" T Nut Driver

Stainless Steel 7/16" x 9/16" x 5/8" x 3/4" Nut Driver

Stainless Steel 7mm T Nut Driver. 3.875" x 3.5".

Stainless Steel 13mm T Nut Driver. 5.5" x 6".

Stainless Steel 13mm T Nut Driver. 4" x 3"

Stainless Steel 13mm T Nut Driver with 2.75" Deep Clearance Bore. 4" x 4.5".

Stainless Steel 10mm L Nut Runner. Thru hole for threded rod.

Stainless Steel 10mm x 13mm Open End Wrench

Stainless Steel 36mm x 38mm Open End Wrench

Stainless Steel 10mm Double Open End Wrench

Stainless Steel Extended 1/2" x 3/8 DR Socket. 12.5" OAL.

Stainless Steel 15/16" 12-pt X 3/8 DR Shallow Socket (.875" OAL)

Stainless Steel 9/32" x 5/16" Open End Wrench

Stainless Steel 5/16" Offset Wrench. 4" OAL x .118" Thickness.

Stainless Steel 1-1/4" Double Offset Wrench

Stainless Steel 11mm T Nut Driver with Sliding Handle.

SET: 11 pc NM Stainless Ball Hex Key Inch Set: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, and 5/16.

*** OUT OF SPEC HANDLE *** 3.0mm Stainless Steel Ball Hex Driver with LARGE Nylon Handle. These were accidentally molded with larger handles. Handle = 4.25" long. Shaft stick out = 2.75". All other aspects are to spec and carries the same warranty and quality assurance as all other Steritool products. Only available while supplies last.

Straight pick with Stainless Steel Handle. DRAWING

45 Degree Pick with Stainless Steel Handle. DRAWING