STERITOOL INC

6mm Non-Magnetic Stainless Steel Stubby Combination Wrench. 316SS.

15mm Stainless Steel Single One Ended Slim Wrench, 0.1"(2.5mm) Thick.

SET: 8 pc Stainless Steel Stubby Combination Wrench Metric Set: 6, 8, 10, 11, 12, 13, 14, and 15.

11/16" Stainless Steel Slim One End Wrench.

SET: 7 pc Stainbless Steel Stubby Combination Wrench Inch Set: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, and 5/8.

NM 1/10" Stainless Steel Screwdriver, SS Handle, 4"(100mm) Shaft. 316L, Low Torque.

1/4"" x 1/4" Stainless Steel Double Box End Wrench, 8"(200mm) OAL.

2.5mm Stainless Steel 'L' Hex Key, 12"(300mm) Shaft.

5.0mm Stainless Steel Nut Driver, Nylon Handle.

6"(150mm) Stainless Steel Diagonal Cutters.DRAWING.

1"(25mm) x 1/4 DR Stainless Steel Extension.

Non-Magnetic Stainless Steel Mallet. SS Handle. Nylon Head.

6mm x 7mm Stainless Steel Open End Slim Wrench.

8"(200mm) Stainless Steel Sliding Bar Clamp.

5"(125mm) Stainless Steel Curved Jaw Locking Pliers for Slap Hammer.

#4 Stainless Steel Star Driver, SS Handle.

1.0mm Stainless Steel Formed 'T' Hex Key, 4-1/2" (112mm) OAL.

0.9mm Stainless Steel 'L' Hex Key. Single End: HEX on short arm only.

0.015" x 10" Stainless Steel Feeler Gauge Stock.

1.0mm Thick Stainless Steel "Lollipop" Gauge Stick, 6"(150mm)OAL.

Non-Magnetic Stainless Steel Bit Driver, 9.25"(235mm) OAL, Nylon Handle.

Stainless Steel Tool Holder Rail. 304 SS & 17-4PH.

Small Stainless Steel Handle. 2-1/2"(63mm) x 1/2"(12.7mm). DRAWING. Available with the following predrilled holes: .109", .125", and 156". All holes are .25" deep. You can specify the dimamater in the comment section during checkout. For any other diameter holes please contact us.

1/4 DR Stainless Steel Collar. DRAWING. *** Available with predrilled holes. Contact us for details.